CBF1000

CBF1000 => Suspension, Forks, Steering, and Chassis Set-up => Topic started by: POD on 12 November, 2018, 08:14:06 AM

Title: Rear wheel dust seal dimensions?
Post by: POD on 12 November, 2018, 08:14:06 AM
Hi all, I have to replace the rear wheel bearings and seals over the next few days as one bearing has some movement, i have identified the part numbers of teh bears i need from a service manual but it doesnt give dimensions of the dust seals. Does anyone know what they are please? The 6303UU bearing on the R/H side for example is 47mmx17mm OD/ID so I know the seals inner and outer size, but without pulling it off the bike I dont know the seal width?

I dont have a Honda dealer close but I do have access to a quality bearing trader thankfully, so if I can get the 2 x seal widths I will be in business :001: :001: :046:

Thanks, POD
Title: Re: Rear wheel dust seal dimensions?
Post by: g5guzzi on 12 November, 2018, 07:59:42 PM
According to honda parts list
the rh seal disc side is 30-47-7.5
lh seal chain side is 30-56-7.5
The inside dia is different to the bearing 
as the seals run on a spacer not the wheel spindle
Malc
Title: Re: Rear wheel dust seal dimensions?
Post by: Piper on 12 November, 2018, 08:08:20 PM
Just a thought is that for the MK1 twin exhaust or MK2 Single exhaust CBF1000 or are they both the same.  Peter.
Title: Re: Rear wheel dust seal dimensions?
Post by: g5guzzi on 12 November, 2018, 08:33:17 PM
parts list gives the same size for both models
Malc
Title: Re: Rear wheel dust seal dimensions?
Post by: POD on 13 November, 2018, 10:32:23 AM
Thanks for that info mate,  :031: :150:perfect!
Bought them today, luckily the the bearing trader had exactly what I needed along with being a good quality FAG bearing.
Regards, POD

*Originally Posted by g5guzzi [+]
According to honda parts list
the rh seal disc side is 30-47-7.5
lh seal chain side is 30-56-7.5
The inside dia is different to the bearing 
as the seals run on a spacer not the wheel spindle
Malc