04 Mar 24, 21:03 pm

Recent Posts

1 2 3 ... 10
1
Brakes and ABS/CBS / Re: Front Brake disc compatibility / options
« Last post by Chuvaaak on 02 March, 2024, 09:30:53 am »
*Originally Posted by keithriley [+]
I forget the numbers right now, but I seem to recall I found some discs that were the same OD, ID and bolt hole fixing but had a 3mm different offset. I pondered making a shim up to throw the caliper out 3mm to compensate but never looked at the set up to see if this was feasible or not.
I'm sure it's not my age. Do CBF discs have a 14mm offset ?
Dear Keithriley, thank you for your reply!
As I remember:
Diameter 295mm
Central diameter 94-95mm
Holes for 5.5mm bolts
Distance between centers of mounting holes, 110mm
Disc offset 20mm on rivets, 18mm on the disc.
 I think rearranging something in the caliper is wrong.  There's also abs...
2
Brakes and ABS/CBS / Re: Front Brake disc compatibility / options
« Last post by keithriley on 01 March, 2024, 04:45:13 pm »
*Originally Posted by Chuvaaak [+]
Thank you for your prompt reply!
Did I understand correctly that discs from non-abs are suitable for the abs model?
About other disk:
That's the problem, I've been looking for disc for 3 months. No one has substitutes with such sizes.
Either the disk ET is not suitable, or the central hole, or something else (more often there is no such ET)...
It is very strange that no one has problems with finding substitutes.
I forget the numbers right now, but I seem to recall I found some discs that were the same OD, ID and bolt hole fixing but had a 3mm different offset. I pondered making a shim up to throw the caliper out 3mm to compensate but never looked at the set up to see if this was feasible or not.
I'm sure it's not my age. Do CBF discs have a 14mm offset ?
3
New Members / Re: Hello iam a new member fron France
« Last post by keithriley on 01 March, 2024, 04:39:46 pm »
Welcome new member from France  :158: I'm an old member from the UK  :001:  Great site here with advice, tips and stories. Enjoy your rides.
4
CBF1000 - General Discussion / Re: Well Bugger me ! Tank support
« Last post by marky99925 on 29 February, 2024, 01:29:54 pm »
I used this for the first time recently when changing the plugs, being a debt collector not an engineer i did see it in the Haynes book, when  i first lifted the tank there was some obstruction, turned out to be the locating lug on the side panel, found out before i forced it and snapped the lug off, that's a first in itself ! It worked fine.
5
New Members / Re: Hello iam a new member fron France
« Last post by marky99925 on 28 February, 2024, 10:24:41 pm »
Hi
I've had mine for 10 years and best bike i've ever owned in 40 years !
The forum is massively helpful, there are threads on almost everything you are likely to need !
Enjoy
6
New Members / Re: Hello iam a new member fron France
« Last post by FLIZ on 28 February, 2024, 12:15:39 pm »
 :405:  :031:
7
New Members / Re: Hello iam a new member fron France
« Last post by Art on 28 February, 2024, 11:27:47 am »
Bonjourno and

 :405:
8
New Members / Hello iam a new member fron France
« Last post by Guidovilo77 on 28 February, 2024, 10:02:20 am »
Hello,
My 2 motorbikes are Honda CBF1000FA 2016 and Honda Deauville 1998.
Thanks
Best regards

9
CBF1000 - General Discussion / Re: Handguards for CBF1000 (2009)
« Last post by raYzerman on 27 February, 2024, 07:34:33 pm »
On my Mk1, I did fit Barkbuster Storms, but as Art says they are a bit on the big side..  The handlebars on these rigs are narrow at 27", so I installed 31" Emgo Scrambles handlebars and promptly shortened them ~3/4" on each end, drilled the appropriate holes for the switch pods.  Next, 1" risers, and found I prefer them a bit back, so next risers that go up and back 1".  Simply because the new bars had slightly less pullback and rise.....  Now we have room for Barkbusters.... at full turn they will contact the mirrors, so adjust mirror bases only slightly swept back.  You'll figure it out.

I would look for slimmer handguards if available, anything helps.

The BB's I used have a clamp mount that just barely works with the wider bars.  There is a type that mount on the bar ends only......
I just repeated this on my MkII.
10
CBF1000 - General Discussion / Re: Handguards for CBF1000 (2009)
« Last post by thebudda08 on 27 February, 2024, 07:33:11 pm »
@art I had risers on before I fitted the guards so they went on very easy on problems only the small cut to the right one 
1 2 3 ... 10
diverse-leafy