Hi everyone
Thanks Art for your detailed response.
Reminds me of a similar bit I had on my 2013 Hornet but then it leads to one more question: this strap doesn't belong on the MkII models of our beefers, correct ? I think I would have noticed it on mine by now...
Cheers

Hello CBNewF,
A big to the forum - especially to a fellow user of the metric system 
Always nice to see a proper self-introduction and with beautiful pics - cherry on the cake - thank you for that.
I noticed you're combining heated grips with wind deflectors - you should be comfy although on second thought, if you ride during winters, I wouldn't be surprised if this happens to be a must in your region... this and the unusually large windshield may actually be rather sensible.
One thing with your model that I like (and don't have on my 2014, later model) is the dual exhaust - really adds a nice touch.
Enjoy your new partner in crime; looking forward to hearing from you!
Emmanuel

Hello everyone.

I purchased a 2008 CBF1000 today. Bike is in great shape and was previously owned by a mature rider and family friend. It has a little less than 30,000 kms. Has the Honda luggage (not currently installed), and a few other accessories installed such as an aftermarket windshield, heated grips, USB charger. I also have some aftermarket pipes and a rear seat cowl to go with it.

I look forward to spending some time on this site to learn more about the bike. From the short 50 kms or so on the bike today, I'm impressed.

What you have there is a SC58 which is Honda's designated model descriptor and part of the VIN on all 2006 to 2009 assembled CBF 1000's. So you see, and understand, a SC58 is an SC58 whether it be be a 2006 , 2007, 2008, 2009 and they're all the same (as are the later crossover 2010 models).

I think what you're describing is part 10 below. It's a safety strap to prevent the petrol pipes and wiring connected to the underside of the petrol tank from being stretched and subsequently damaged when the front of the tank is raised for servicing the top end of the engine (spark plugs etc). It bolts to the left side of the frame by means of a M6 x 35 mm flange bolt.

Hi i have a 2009 cbf and have put a fuel tank off a 2006 cbf on it but there is a thick wire attached to it looks like an earth wire it is looped at the end , can anyone tell me if it is an extra earth to be connected as my 2009 tank never had one attached .