|
91
New Members / New member from Portugal« Last post by Mneves on 26 May, 2023, 04:34:54 pm »Hello Guys,
Here i am to share my experiences with you! Just brought this bike!! Regards from portugal!!! 92
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by obcinar on 26 May, 2023, 03:41:36 pm »I read code today and i got 8 short blinks (then pause and 8 again, pause 8 again), that means its TP sensor, as i read from manuals.
Since problem came after sometime of driving, probably conections are ok. So i need to change that sensor? I kindly ask for opinimum if i can do it by myself? Thank you guy in advance and greeting from Slovenia. 93
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by obcinar on 24 May, 2023, 05:41:16 pm »Thank your for advice.. Ill send updates and ask for more help if ignition cols must be changed.
94
New Members / Re: new Member Frank« Last post by Froggymanny on 24 May, 2023, 04:07:31 pm » Goedeavond Frank! Ride safe as you get your bearings on this machine - it has some horse power and can get you anywhere quick and in comfort - great choice ! And... welcome to the forum. Are you an Itchyboots fan ?  95
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by keithriley on 24 May, 2023, 02:27:00 pm »Hi Robi,
Sounds like a very similar issue I've had on another Honda and it's pointing towards the ignition coils, HOWEVER, as Art rightly pointed out, without proper fault finding and testing you could just be guessing. 96
New Members / Re: new Member Frank« Last post by keithriley on 24 May, 2023, 02:22:58 pm »Welcome Frank, great looking bike, looks very tidy. Enjoy it
97
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by obcinar on 24 May, 2023, 12:39:35 pm »Yes, thats the plan. Actully i never did that before. I hope i can do it. I just need to translete your post (linked one) and i hope i can do it.
I need to check whats sparkplug are, but since problem is same before i change it and now, probably those are not problem this time. 98
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by Art on 24 May, 2023, 12:32:00 pm »So...
 Originally Posted by Art ![[+]](https://www.cbf1000.com/vbicons/viewpostright.png "View Post") Are you going to check for any stored DTC's? 99
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by obcinar on 24 May, 2023, 09:20:01 am »Thank your for your answer.
No work was done it just happened... 100
General Maintenance, Servicing, and Mechanical / Re: Rought acceleration in 2nd/3th gear and engine stall« Last post by Art on 24 May, 2023, 08:55:41 am »Was any work carried out between running OK and running rough?
What spark plugs did you fit? Are there any current or stored Diagnostic Trouble Codes (DTC's)? There's a how to read DTC's here Other root causes could be faulty: ignition system; fuel system or fuel pump; idle air control valve; exhaust gas circulation valve or an intake manifold leak, or out of specification valve clearances. Obviously you don't want to be willy nilly changing parts, prove a part is faulty or failed by methodical testing and diagnosis before replacing. |