Author Topic: TPS Position  (Read 346 times)

0 Members and 1 Guest are viewing this topic.

Offline Biffer-GB

  • CBF Member
  • **
  • Topic Author
  • Posts: 16
  • Bike: CBF1000A
  • City / Town: Bexhill-On-Sea
  • Country: gb
TPS Position
on: 22 September, 2021, 11:29:59 AM
How do all, couldnt find for looking. I have just ordered a TPS from fleabay and been asked if it's a 10 or 2 o'clock position. Any of you able to confirm please?

CBF1000A 2008

Much love, Gilmo.
Last Edit: 22 September, 2021, 11:33:06 AM by Biffer-GB
Gilmo

#1

Offline Art

  • CBF Legend
  • *****
  • Posts: 1448
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: TPS Position
Reply #1 on: 22 September, 2021, 05:05:56 PM
The CBF 1000 TP sensor can be a can of worms, there is much conflicting information on availability and suitability of a range of non CBF1000 specific TP sensors. Many reports claim of TP sensor issues being resolved but there tends to be no details of how.
Last Edit: 22 September, 2021, 05:08:24 PM by Art

#2

Offline Art

  • CBF Legend
  • *****
  • Posts: 1448
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: TPS Position
Reply #2 on: 22 September, 2021, 06:28:10 PM
Maybe take photographs of the TP sensor on, off, inside and out for the supplier to identify. Looking at the TP sensor and given the choices, I'd guess it sits at 2 o clock but I don't know.



#3

Offline Biffer-GB

  • CBF Member
  • **
  • Topic Author
  • Posts: 16
  • Bike: CBF1000A
  • City / Town: Bexhill-On-Sea
  • Country: gb
Re: TPS Position
Reply #3 on: 22 September, 2021, 06:37:20 PM
Good shout re photos. May do that tomorrow. Chap said I can send back if wrong one.

The TPS photo you added looks upside down mind! My wires come out the bottom lol
Gilmo

#4

Offline Biffer-GB

  • CBF Member
  • **
  • Topic Author
  • Posts: 16
  • Bike: CBF1000A
  • City / Town: Bexhill-On-Sea
  • Country: gb
Re: TPS Position
Reply #4 on: 22 September, 2021, 06:39:21 PM
*Originally Posted by Art [+]
The CBF 1000 TP sensor can be a can of worms, there is much conflicting information on availability and suitability of a range of non CBF1000 specific TP sensors. Many reports claim of TP sensor issues being resolved but there tends to be no details of how.

Cheers, I'm not worried about changing it, or calibrating. Found lots of advice and relatively simple.  Just the two options for which one.

Gilmo

#5

Offline Art

  • CBF Legend
  • *****
  • Posts: 1448
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: TPS Position
Reply #5 on: 22 September, 2021, 07:31:23 PM
You're right, it is upside down, still looks most likely to be 2 o clock. Didn't give it too much thought just a quick cut and paste from the workshop manual.
Last Edit: 22 September, 2021, 07:35:43 PM by Art

#6

Offline Biffer-GB

  • CBF Member
  • **
  • Topic Author
  • Posts: 16
  • Bike: CBF1000A
  • City / Town: Bexhill-On-Sea
  • Country: gb
Re: TPS Position
Reply #6 on: 22 September, 2021, 08:21:45 PM
I didnt, but did wonder what was up 🤣🤣🤣
Gilmo