27 Sep 23, 06:36 am

1   Go Down

Author End can upgrades  (Read 4129 times)

0 Members and 1 Guest are viewing this topic.

    • Offline Steve1961   gb

    • CBF Newbie  ‐    5
    • *
    • Topic Author

    Offline Steve1961

    • CBF Newbie
    • *
    • Topic Author
    • Posts: 5
    • Bike: CBF1000 A7 ABS
    • City / Town: Waterlooville
    • Country: gb
    End can upgrades
    on: 25 December, 2020, 02:20:01 pm
    25 December, 2020, 02:20:01 pm
    Can anyone who has done this advise what they went for and end results in their opinion please?
    Thanks
    Steve
    		•

    Offline edger   gb

    • CBF Master  ‐    510
    • ****
      #1

    Offline edger

    • CBF Master
    • ****
    • Posts: 510
    • Country: gb
    Re: End can upgrades
    Reply #1 on: 25 December, 2020, 06:22:21 pm
    25 December, 2020, 06:22:21 pm
    Please define  upgrade
    New cans, or Gutting out the original cans /
    I did the latter cos I'M a cheap skate. seat of the pants feels better and sounds  but it may be just a case of the emperor's  new clothes :mfrlol:

    PS i did post a how to some where ..... look for exhaust baffle removal 
    Last Edit: 25 December, 2020, 06:25:18 pm by edger

    • Offline Steve1961   gb

    • CBF Newbie  ‐    5
    • *
    • Topic Author
      • #2

    Offline Steve1961

    • CBF Newbie
    • *
    • Topic Author
    • Posts: 5
    • Bike: CBF1000 A7 ABS
    • City / Town: Waterlooville
    • Country: gb
    Re: End can upgrades
    Reply #2 on: 26 December, 2020, 08:54:35 am
    26 December, 2020, 08:54:35 am
    New replacement cans.
    		•

    Offline Sabes   gb

    • CBF Member  ‐    33
    • **
      #3

    Offline Sabes

    • CBF Member
    • **
    • Posts: 33
    • Bike: CBF1000FAC
    • City / Town: Havant
    • Country: gb
    Re: End can upgrades
    Reply #3 on: 26 December, 2020, 09:57:41 am
    26 December, 2020, 09:57:41 am
    On my A9 i replaced stock with Beowolf end cans. Sounded great and were not too expensive. I have a FAC now and am thinking of doing the same to it as the stock end can is a bit quiet.

    any suggestions for the FAC Model?

    Be heard, Be seen, be safe :)

    Mark
    		•

    Offline edger   gb

    • CBF Master  ‐    510
    • ****
      #4

    Offline edger

    • CBF Master
    • ****
    • Posts: 510
    • Country: gb
    Re: End can upgrades
    Reply #4 on: 26 December, 2020, 08:27:39 pm
    26 December, 2020, 08:27:39 pm
    Bit off topic BUT... has  any one else heard the  chatter   about the police getting NOISE activated speed camera style kit
    It seems that in the peaceful lock down country side noisy bikes are becoming more noticeable.
    Also parts of Switzerland  are banning all bikes from parts of the country at the weekends
    i expect other EU partners may follow the lead .

    Oh and I know we are out :mfrlol:

     

    • Offline knapdog   wales

    • CBF Master  ‐    577
    • ****
      #5

    Offline knapdog

    • CBF Master
    • ****
    • Posts: 577
    • Stay between the hedges!
    • City / Town: Barry, Vale of G
    • Country: wales
    Re: End can upgrades
    Reply #5 on: 27 December, 2020, 05:29:32 pm
    27 December, 2020, 05:29:32 pm
    On my first mk2  biffer I had a Leo Vince. I was very happy with it.
    Check out my YouTube video......
    I'm still undecided as to which exhaust for my current one. Thinking of Arrow though there's a waiting list due to Covid affecting production in Italy.



    		•

    Offline Sabes   gb

    • CBF Member  ‐    33
    • **
      #6

    Offline Sabes

    • CBF Member
    • **
    • Posts: 33
    • Bike: CBF1000FAC
    • City / Town: Havant
    • Country: gb
    Re: End can upgrades
    Reply #6 on: 09 March, 2021, 06:56:06 pm
    09 March, 2021, 06:56:06 pm
    hey fella.... was the leo vince an easy fit? was it a straight replacement?

    cheers

    Mark
    		•

    Offline knapdog   wales

    • CBF Master  ‐    577
    • ****
      #7

    Offline knapdog

    • CBF Master
    • ****
    • Posts: 577
    • Stay between the hedges!
    • City / Town: Barry, Vale of G
    • Country: wales
    Re: End can upgrades
    Reply #7 on: 09 March, 2021, 07:09:49 pm
    09 March, 2021, 07:09:49 pm
    *Originally Posted by marksabin [+]
    hey fella.... was the leo vince an easy fit? was it a straight replacement?

    cheers

    Mark

    Easy apart from removing the cables from the servo, which again was easy.
    		•

    Offline Chip   00

    • CBF Newbie  ‐    1
    • *
      #8

    Offline Chip

    • CBF Newbie
    • *
    • Posts: 1
    • Bike: Cbf1000 A-6
    • City / Town: Leeds
    • Country: 00
    Re: End can upgrades
    Reply #8 on: 14 March, 2021, 02:25:05 pm
    14 March, 2021, 02:25:05 pm
    Hi,I have just fitted a pair of 400mm stainless oval black widows and must say , they sound really good , loads of grunt and popping in deceleration,really pleased
    		•

    Offline knapdog   wales

    • CBF Master  ‐    577
    • ****
      #9

    Offline knapdog

    • CBF Master
    • ****
    • Posts: 577
    • Stay between the hedges!
    • City / Town: Barry, Vale of G
    • Country: wales
    Re: End can upgrades
    Reply #9 on: 14 March, 2021, 02:32:16 pm
    14 March, 2021, 02:32:16 pm
    *Originally Posted by knapdog [+]
    On my first mk2  biffer I had a Leo Vince. I was very happy with it.
    Check out my YouTube video......
    I'm still undecided as to which exhaust for my current one. Thinking of Arrow though there's a waiting list due to Covid affecting production in Italy.




    Have now received the Arrow and fitted it...

    1   Go Up
     


    Recent Posts