Author Topic: Option 6 connector etc  (Read 1180 times)

0 Members and 1 Guest are viewing this topic.

Offline Sabes

  • CBF Member
  • **
  • Topic Author
  • Posts: 30
  • Bike: CBF1000FAC
  • City / Town: Havant
  • Country: gb
Option 6 connector etc
on: 22 November, 2020, 10:18:47 PM
Guys... what is this option 6 connector? Sounds like its ready made connectors for connecting other ancilliaries to is that right?

if so.. are they all switched

how many are there and where?

Should they all be +12V?

I just tapped into the tail light +12 to connect a trigger relay for a Power distribution module. Sounds like i didnt need to do that.

cheers

Mark

#1

Offline Art

  • CBF Legend
  • *****
  • Posts: 1445
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: Option 6 connector etc
Reply #1 on: 23 November, 2020, 10:25:44 AM
The option connector is a yellow six pin connector located behind the right rear cowl just forward of the engine control module and buried in plain view. There are five connections, the cable colours are

white/black - 12v 10A fused ignition switched live
red/green - 12v 20A fused always live
orange - left indicator
light blue - right indicator
green - chassis ground

Some wiring diagrams I did earlier here  and here's one of particular interest




#2

Offline Sabes

  • CBF Member
  • **
  • Topic Author
  • Posts: 30
  • Bike: CBF1000FAC
  • City / Town: Havant
  • Country: gb
Re: Option 6 connector etc
Reply #2 on: 23 November, 2020, 11:36:29 AM
I see... is this also on the Mk II - 2010 onward? I see your diagram is 2006-2009.

cheers

Mark

#3

Offline Art

  • CBF Legend
  • *****
  • Posts: 1445
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: Option 6 connector etc
Reply #3 on: 23 November, 2020, 12:55:17 PM
Yes, the SC58 and SC64 option connectors are wired exactly the same

https://i.imgur.com/TeuUjbX.png

#4

Offline Sabes

  • CBF Member
  • **
  • Topic Author
  • Posts: 30
  • Bike: CBF1000FAC
  • City / Town: Havant
  • Country: gb
Re: Option 6 connector etc
Reply #4 on: 23 November, 2020, 01:05:37 PM
thanks

Mark

#5

Offline TheRenéLouis

  • CBF Member
  • **
  • Posts: 12
  • Bike: MK1 CBF1000A
  • Country: scotland
Re: Option 6 connector etc
Reply #5 on: 16 September, 2021, 07:36:42 PM
So, does this mean one could use the white / black wire on the Option 6 connector to connect say a sat-nav, a USB plug to charge a phone, or an electric shaver?

#6

Offline Art

  • CBF Legend
  • *****
  • Posts: 1445
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: england
Re: Option 6 connector etc
Reply #6 on: 17 September, 2021, 04:41:20 AM
Yes, providing you're connecting them to the 12v 10A supply as per the manufacturers instruction.

My preferred option is to make up a separate accessory harness, powered directly from the battery via a relay, run power to wherever you need it

something like this
Last Edit: 17 September, 2021, 04:44:32 AM by Art

 


diverse-leafy