Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: HELP! Handlebar risers.  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

Offline MrMellows

  • Newbie
  • *
  • Posts: 1
  • Bike: CBF1000 (2009)
  • City / Town: Dublin
  • Country: Ireland
HELP! Handlebar risers.
« on: 17 June, 2020, 04:58:26 PM »
Hi All ,

Have a query regarding handlebar risers. I'm after buying risers for my 2009 CBF 1000 GT ABS. (see below link)

https://voigt-mt.de/Voigt-MT-GmbH-Handlebar-risers-30mm-with-offset-21mm-for-Honda-CBF-1000-SC58-06-09-mit-ABE-V3021-riser-clamp-and-conversion

However , I do not have enough slack for the cables. Has anyone encountered this problem before ? And if so could you direct me to the correct website/product where I can buy the necessary cable extenders. I cannot find them anywhere online.

Any help would be much appreciated.

Mike

Offline Careca

  • CBF Member
  • **
  • Posts: 30
  • Bike: CBF1000
  • City / Town: Sevenoaks
  • Country: United Kingdom
Re: HELP! Handlebar risers.
« Reply #1 on: 23 June, 2020, 07:28:28 PM »
Hi Mike,

I haven't come across hose extenders. Im not sure i would want to use them . The answer is you need longer hoses. I would get in touch with HEL , go to the contact page and ring them up and tell them what it is you want. They will make them for you in whatever colour you want. .

https://www.helperformance.com/motorcycle/braided-lines/brake-lines/honda/cbf


They do lost of standard replacement hoses , just tell them you need them 50 mm longer or however much longer you want  as you have fitted bar risers.

Regards,
Nat.

Offline CaseyJones277

  • CBF Member
  • **
  • Posts: 29
  • Bike: Black Mk2
  • City / Town: Shavington
  • Country: United Kingdom
Re: HELP! Handlebar risers.
« Reply #2 on: 23 June, 2020, 07:50:28 PM »
When I was first looking at Handlebar Risers I ordered some a bit like this, up and back type. But after ordering, reading a few posts on here I realised it was going to cause a lot of myther! I got in touch with the supplier and just got 25mm straight forward Risers. These fitted my mk2 fine, but anymore than 25mm I think would’ve caused issues! Think I only paid around £25-27 if I remember correctly.

Offline g5guzzi

  • CBF Pro
  • ***
  • Posts: 174
  • Bike: cbf1000fa
  • City / Town: kirton lincs
  • Country: uk
Re: HELP! Handlebar risers.
« Reply #3 on: 23 June, 2020, 09:43:56 PM »
Hi Mike
Just in  case you are not aware the handlebar mountings on
the mk1 are adjustable backwards and forwards by  i believe turning the
the bottom post around. if it is already set to the rear if turned round
to the front you may gain a bit of slack if your lucky.

Malc

Offline thebudda08

  • CBF Member
  • **
  • Posts: 69
  • Bike: cbf1000 mk1
  • City / Town: Dublin
  • Country: ireland
Re: HELP! Handlebar risers.
« Reply #4 on: 29 June, 2020, 02:24:45 PM »
i have the 09 non gt , I have these on now 3 years no problem  , im sure they are 25mm up and 22m mmm back , them numbers are in my head , ive had no problems with any cables

 
20200629-123940" border="0

20200629-123916" border="0


20200629-123911" border="0

 


diverse-leafy