Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Main stand not available?  (Read 392 times)

0 Members and 1 Guest are viewing this topic.

Offline kenmyh

  • Newbie
  • *
  • Posts: 2
  • Bike: cbf1000s7
  • City / Town: Oslo
  • Country: Norway
Main stand not available?
« on: 09 July, 2020, 10:24:26 AM »
Greetings from Norway,

Just bought a CBF1000S7 a couple of days ago.  :152: I really want to mount a main stand on it, since there is non.
This is also were my problem begins. I've not been able to find anyone online who sells the main stand anymore, they all say it's went out of production.

So my question to you is, does anyone know where I might be able to buy one, or if there is another main stand from another model etc which fits w/o big adjustments?

Thanks in advance!

/Ken

Offline Art

  • CBF Master
  • ****
  • Posts: 894
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: England
Re: Main stand not available?
« Reply #1 on: 09 July, 2020, 01:41:20 PM »
 :405:

What is a CBF1000S7?

Centre stands for CBF 1000 SC58 models come up regularly on ebay. You'll need the stand, pivot, bolt and two springs. Show it a wire brush and three coats of Hammerite gloss black smooth and it will be looking as good as a new one.

Here is one I did earlier
« Last Edit: 09 July, 2020, 01:46:16 PM by Art »

Offline g5guzzi

  • CBF Pro
  • ***
  • Posts: 175
  • Bike: cbf1000fa
  • City / Town: kirton lincs
  • Country: uk
Re: Main stand not available?
« Reply #2 on: 09 July, 2020, 09:08:32 PM »
https://www.motorcyclespareparts.eu/en

This firm may be able to help you.
I had a look on the site and it let me put the stand in
the basket to buy and did not say out of stock as it normally does
if not available. It is expensive.
If you do find a stand you will also need the left hand cover on
the silencer as it has a cutaway for the arm on the stand
unless you modify your old cover.

Malc

Offline kenmyh

  • Newbie
  • *
  • Posts: 2
  • Bike: cbf1000s7
  • City / Town: Oslo
  • Country: Norway
Re: Main stand not available?
« Reply #3 on: 10 July, 2020, 06:07:29 AM »
Thanks guys!

After some more detective work yesterday, I found a dealer in Germany who had the stand in stock. So order it form them :)

I think S7 is a short for SC58 2007. Alteast on all the sites I've been looking at they use that designation.

Offline Art

  • CBF Master
  • ****
  • Posts: 894
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: England
Re: Main stand not available?
« Reply #4 on: 10 July, 2020, 07:59:02 AM »
Left hand exhaust cut out - I forgot about that as above and as well as the two springs, pivot and bolt you'll need the left hand exhaust heat shield with the cut out to receive the centre stand when its in the up position.

Fitting the stand can be a challenge - Remove both exhaust silencers, grease the pivot, spring coils and spring mounting points before fitting. To fit the stand place it over the exhaust collector box pipes at a 45° angle left side first then right twisting the orientation anti-clockwise and then clockwise to get the stand over the collector box pipes and to engage the stand between the frame pivot points. At first it almost seems impossible and as if you have the wrong stand, patience is your best friend here. If the centre stand snags on the collector box pipes you have it at the wrong angle/orientation, it should be possible to pass the stand over the pipes without any snagging. Fitting the spring is the next challenge, I do this by hooking the spring on the front mounting and using a length of cord tied between the spring hooks and a lever using the rear wheel as the fulcrum, with the centre stand propped in as near to the up position as possible stretch the spring on to the rear mounting point, chock the wheels or put the bike in gear to prevent it from rolling forward and off the side stand.

S7 never heard of that, any idea what the 'S' would stand for? SC58 is the Honda assigned model type number and identifies the base model for what it is and distinguishes it from the SC64 and other Honda motorcycles.  CBF 1000 is the Honda assigned Commercial Name. What is the model type or commercial name shown on your registration document or Certificate of Conformity? You should see something like 'CBF 1000-7', the '7' being the manufactured year. The 1000 maybe suffixed with an A for ABS model, a T for Touring model or AT for ABS and Touring model.
« Last Edit: 10 July, 2020, 08:01:01 AM by Art »

Offline alan sh

  • Article Editor
  • CBF God
  • *****
  • Posts: 4965
  • Bike: CBF1000/CB1300
  • City / Town: Rochdale
  • Country: UK
Re: Main stand not available?
« Reply #5 on: 02 August, 2020, 02:22:32 PM »
Could S7 be a mistake - the A is next to S on the keyboard - so A7.

Alan
Red MK II with full luggage, MRA screen, hugger, crash bungs, heated grips and Autocom.
CB1300SA with a few bits.
https://ourbikingholidays.wordpress.com/
https://mybikinghistory.wordpress.com/

Offline Shed

  • CBF Master
  • ****
  • Posts: 356
  • City / Town: Newcastle
  • Country: UK
Re: Main stand not available?
« Reply #6 on: 02 August, 2020, 03:40:05 PM »
*Originally Posted by alan sh [+]
Could S7 be a mistake - the A is next to S on the keyboard - so A7.
Alan

 :0461:
Easy typo error to make.

 


Recent Posts

topic motorcycle stands
[For Sale Board]
panthers220
Yesterday at 05:17:21 PM
topic Tail Tidy
[CBF1000 - General Discussion]
Baldrick5000
Yesterday at 12:28:19 PM
topic MRA VARIABLE TOURING SCREEN MK 1 , side brackets and panniers
[Items Wanted]
moayling
11 August, 2020, 07:38:20 PM
topic Permanent puncture repair
[Tyres and Wheels]
FLIZ
11 August, 2020, 05:48:36 PM
topic Garmin 550 Sat Nav SOLD
[For Sale Board]
panthers220
11 August, 2020, 05:03:52 PM
topic Braided hoses
[Brakes and ABS/CBS]
NJD
11 August, 2020, 04:07:28 PM
topic Pannier stays
[CBF1000 - General Discussion]
thebudda08
11 August, 2020, 03:32:17 PM
topic NC500
[Travel Section]
Rev Ken
11 August, 2020, 02:20:29 PM
diverse-leafy