Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Table-lift  (Read 443 times)

0 Members and 1 Guest are viewing this topic.

Offline Sean o caoimh

  • CBF Member
  • **
  • Posts: 15
  • Bike: Tiger 800
  • City / Town: Cork
  • Country: Ireland
« on: 03 May, 2020, 05:44:07 PM »
Hi all,
          I'm looking for information on how to repair my motorcycle table lift. It wont extend to the full height!
 it's a manual lift and it stops rising just before the safety  bars engage. I have removed the jack from the lift, but don't  know where or how to top-up with hydraulic oil.

Offline FLIZ

  • CBF Pro
  • ***
  • Posts: 95
  • Bike: Honda CBF1000A9
  • City / Town: North Yorkshire
  • Country: England
Re: Table-lift
« Reply #1 on: 04 May, 2020, 09:57:59 AM »
Hello.  It does sound like it is just short of oil, so needing a top up of hydraulic oil. (not brake fluid)
Have you tried going online to the manufacturers website for info on topping up oil level? Worth a try.
Alternatively try posting a photo of the Hydraulic cylinder and ram on the forum, and we/us/someone on here may be able to assist in
identifying where to top up. Good luck.