Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: O2 Sensor of 2006 is the same with 2011  (Read 748 times)

0 Members and 1 Guest are viewing this topic.

Offline Jimav

  • CBF Member
  • **
  • Posts: 17
  • Bike: CBF1000/06
  • City / Town: Athens
  • Country: Greece
O2 Sensor of 2006 is the same with 2011
« on: 30 April, 2020, 10:20:39 AM »
Hello to all
i am thinking of changing exhausts from 4 in 2 which i have now (2006) to 4 in 1 of the newer model.

I see than O2 sensor has different part number.
Is it really different?

36531MFAD01 vs 36531MGJD01

Has anyone done this replacement ?

Regards to all
Dimitris

Offline Jimav

  • CBF Member
  • **
  • Posts: 17
  • Bike: CBF1000/06
  • City / Town: Athens
  • Country: Greece
Re: O2 Sensor of 2006 is the same with 2011
« Reply #1 on: 27 November, 2020, 12:17:17 PM »
It is not,as i found out

Offline g5guzzi

  • CBF Pro
  • ***
  • Posts: 178
  • Bike: cbf1000fa
  • City / Town: kirton lincs
  • Country: uk
Re: O2 Sensor of 2006 is the same with 2011
« Reply #2 on: 27 November, 2020, 07:47:46 PM »

Offline NeiljohnUK

    CBF Master
    ****
    Posts: 318
        View Profile Personal Message (Offline)
    Bike: CBF1000 F650GS
    City / Town: Soton.
    Country: England

Re: Mk2 headers on Mk1
« Reply #7 on: 21 November, 2020, 08:04:25 PM »

    Quote

*Originally Posted by NeiljohnUK

So did you do it? My Mk1 downpipes have split and she's just failed the MoT due to 'excessive exhaust leakage' as a result, so I'm now looking at changing the whole system, as Mk1 exhausts are impossible to find good used, except from breakers in eastern Europe...

Well it's possible, Mk2 on to Mk1 now done, mainstand has to come off, the springs are in the way, and the lambda sensor cable is too short with the wrong plug, extend with original sensors cable.

Offline Jimav

  • CBF Member
  • **
  • Posts: 17
  • Bike: CBF1000/06
  • City / Town: Athens
  • Country: Greece
Re: O2 Sensor of 2006 is the same with 2011
« Reply #3 on: Yesterday at 10:21:42 AM »
well
i tried to do the same but i was unprepared and gave up.

You have 2 options
Get a used 4 in 1 from the newer model. But needs modification to fit. Also new o2 sensor or o2 eliminator.
Get am aftermarket 4 in 1 , but i am not sure if you can find one. If you do , let me know.

I would like to get rid of the catalyst and the only option is a hand made exhaust.
 

Online Art

  • CBF Legend
  • *****
  • Posts: 1089
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: England
Re: O2 Sensor of 2006 is the same with 2011
« Reply #4 on: Yesterday at 01:58:32 PM »
If I was a gambling man I'd wager the only difference between one lambda sensor and the other is the length of the wiring. Both the SC58 and SC64 have 4 wire lambda sensors with the same wiring connections

Loom                       Sensor
Green/orange           Grey (ground)
Orange/white            Black (signal)
Black/white              White (heater)
Black/green              White (heater)

The grey, black,white,white wiring of the sensor is generic across virtually all 4 wire lambda sensors. All of which probably means that splicing the connector wiring of one sensor into the other to extend the wiring length will modify one to fit the other. Disclaimer - At your own risk, I'm not a gambling man, blah, blah, blah.
 

Offline Jimav

  • CBF Member
  • **
  • Posts: 17
  • Bike: CBF1000/06
  • City / Town: Athens
  • Country: Greece
Re: O2 Sensor of 2006 is the same with 2011
« Reply #5 on: Yesterday at 02:56:49 PM »
Unfortunately , there is  difference at the thread.
I found it out when i bought my new exhaust which is for sale now
https://www.car.gr/parts/view/28569094-laimoi-eksatmisis-4-se-1-honda-cbf1000


Offline NeiljohnUK

  • CBF Master
  • ****
  • Posts: 319
  • Bike: CBF1000 F650GS
  • City / Town: Soton.
  • Country: England
Re: O2 Sensor of 2006 is the same with 2011
« Reply #6 on: Yesterday at 03:23:44 PM »
*Originally Posted by g5guzzi [+]
Offline NeiljohnUK

    CBF Master
    ****
    Posts: 318
        View Profile Personal Message (Offline)
    Bike: CBF1000 F650GS
    City / Town: Soton.
    Country: England

Re: Mk2 headers on Mk1
« Reply #7 on: 21 November, 2020, 08:04:25 PM »

    Quote

*Originally Posted by NeiljohnUK

So did you do it? My Mk1 downpipes have split and she's just failed the MoT due to 'excessive exhaust leakage' as a result, so I'm now looking at changing the whole system, as Mk1 exhausts are impossible to find good used, except from breakers in eastern Europe...

Well it's possible, Mk2 on to Mk1 now done, mainstand has to come off, the springs are in the way, and the lambda sensor cable is too short with the wrong plug, extend with original sensors cable.

Indeed thats what I found, the lambda sensor thread sizes are different, and the cables are different lengths with different plugs, you can cut and join the original cable on to the newer one's cable as I have done, though I also have the option to fit an eliminator plug that I bought just in case.
Formerly an EMT (1), now a Superintendent, not that makes any difference, still just as crazy...
I ride for pleasure, commute mostly by PTW, do most of my own spannering.
Started to do my IAM, having done the RoSPA version years ago, seems I'm not fast enough, unlike the Chief Observer I'm not prepared to do 50+ in a 40 limit, so I've given it up as a bad job, 'too slow to pass, too old to care'!

Online Art

  • CBF Legend
  • *****
  • Posts: 1089
  • Bike: SC58 CBF1000 A-6
  • City / Town: Shoreditch
  • Country: England
Re: O2 Sensor of 2006 is the same with 2011
« Reply #7 on: Yesterday at 07:26:54 PM »
*Originally Posted by Jimav [+]
Unfortunately , there is  difference at the thread.
I found it out when i bought my new exhaust...

I stand corrected then but how misleading is this

*Originally Posted by NeiljohnUK [+]
Well it's possible, Mk2 on to Mk1 now done, mainstand has to come off, the springs are in the way, and the lambda sensor cable is too short with the wrong plug, extend with original sensors cable.