Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Neutral light switch  (Read 478 times)

0 Members and 2 Guests are viewing this topic.

Offline Westoneboy

  • CBF Member
  • **
  • Posts: 31
  • Bike: Cbf1000 2007
  • City / Town: North Ayrshire
  • Country: Scotland
Neutral light switch
« on: 23 April, 2018, 03:24:36 PM »
Hi guys just thought I would post this and maybe it will help someone with this problem. My neautral light switch needed replaced so I read some info on here on how to change it. First of all I would like to say it is not a pig of a job it is a very simple job. All that I had to do was take of the 3 nuts on the r/ h plate which carries the footrest plate, remove the 2 alan bolts holding the footrest plate to it , drft back the 3 bolts to clear the plate ( taking care not to damage the threads) and pull out the plate .This gave me direct access to the switch.Pull the rubber boot back and using an 8mm spanner disconnect the wire then 14mm spanner and screw out the switch. Fit new switch an reverse procedure to rebuid. Job took me total 15 minutes. No need to remove exhaust or anything else.No hassle whatsoever. Hope I have been of help..Cheers Westoneboy.

Offline J-man

  • CBF Master
  • ****
  • Posts: 570
  • Bike: CBF1000A6
  • Country: Belgium
Re: Neutral light switch
« Reply #1 on: 23 April, 2018, 06:44:18 PM »

Offline Gizmo

  • CBF Member
  • **
  • Posts: 31
  • Bike: CBF1000 and T110
  • City / Town: In Hampshire
  • Country: UK
Re: Neutral light switch
« Reply #2 on: 14 January, 2019, 12:27:09 PM »
Oh boy, this could be the best post I'll read all day.

With a dicky neutral light on my 82k 07 bike I've cleaned up the sidestand switch and connectors to no avail, so the neutral switch was next on the check list.
Reading the Bob Ollis-Brown manuals on replacing a neutral switch line 1 reads:
    "Remove engine from frame"     -     seriously!! WTH   :005: :005: :005:

Then found this post.   :046: :046: