Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Handle bars  (Read 9168 times)

0 Members and 1 Guest are viewing this topic.

Offline Cowtown Biffer Bomber

  • CBF Member
  • **
  • Posts: 13
  • Bike: 2009 CBF1000/A
  • City / Town: Calgary
  • Country: Canada
Re: Handle bars
« Reply #40 on: 08 July, 2019, 07:23:29 PM »
I'm concerned about both the front brake the clutch line. I gave them both a tug last night, and there's not much slack at all. I just bought a set of 26 mm UP and 20 mm back (or forward) risers, and the guy at the Honda shop says they'll work without mods. Thoughts? Here they are:

http://www.zeta-racing.com/clamps/bar_rise_offset/index.html

I suppose I could just see if they work, but I'd rather just buy some 20 mm UP and be done with it if there's no way these are going to work.
"Could a greater miracle take place than for us to look through each other's eyes for an instant?"
-  Henry David Thoreau